Omega FoodPro Manuel d'utilisateur télécharger pdf (Page 13)

14

1. Place the large work bowl onto the

motor housing with the main handle

to the left of the power panel. This

aligns the bowl to properly engage the

safety interlock turn the main handle to

the right until it clicks” or “locks” into

place. The main handle should now be

centered with the Power Panel.

2. The desired size of Slicing or Shredding

should be facing away from the adapter

when installing the disk

3. Place the Slicing or Shredding disk

onto the Disc Adapter. Be sure to align

the center hole of the disk with the

disc adapter.

4. Once the Adapter is inserted into the

Disk, rotate the disk until it is seated.

5. Place the Adapter/Disk Assembly onto

the main motor shaft. You may have to

rotate the assembly partially to properly

“seat” onto the shaft.

6. Place the Work Bowl Cover onto the

Work Bowl with the interlock “tab” to

the left of the main handle. Turn the

Cover to the right until it “clicks” or

“locks” into place. The “tab” should

now be aligned with the Main Handle.

ASSEMBLY–SLICING OR SHREDDING DISK

1.

2.

3.

6.

4.

5.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Commentaires sur ces manuels

Pas de commentaire