Omega ISA- BUS MULTI-FUNCTIONAL BOARD OME-A822PG Manuel d'utilisateur télécharger pdf (Page 46)

5. Diagnostic Utility

5.1 Introduction

The A82XDIAG.EXE diagnostic utility is a menu-driven program which allows

complete testing of the OME-A-822PGL/PGH board. To run the diagnostic utility,

change to the subdirectory used in the installation process (C:\OME-A-822 for example).

Then type "A82XDIAG" <Enter> to start the application. These steps are shown

below:

C:\>CD A822<Enter>

C:\A822>CD DIAG <Enter>

C:\A822\DIAG>A82XDIAG <Enter>

A configuration file, named OME-A-82X.CFG is associated with the

A82XDIAG.EXE program. The configu ration of the OME-A-822PGL/PGH board

is stored in this file. The stored information includes the board's I/O base address, interrupt

number and DMA channel. Changes are not automatically saved to the configuration file,

the user must select the save function to save any changes. When the

A82XDIAG.EXE utility starts, it will automatically check if the jumper setting of

the I/O base address matches the value stored in the configuration file. If the addresses do

not match, an error message will appear as shown below.

OME-A-822PGL/PGH Hardware Manual ---- 44

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 62 63

Pas de commentaire

Omega ISA- BUS MULTI-FUNCTIONAL BOARD OME-A822PG Manuel d'utilisateur Page 46