Omega RD200 Manuel d'utilisateur télécharger pdf (Page 75)

－７１－

11. OTHER PROGRAMMING

11.9 Tags

Tags up to 9 digits can be assigned for digital data printing and scale printing.

Press and simultaneously to display the [Tag] programming screen. The default is no programming

of tags.

(Scale printing) (List printing)

1 Programming Mode

Note) The default is no programming of tags. The following figure is an example of 9-digit tag programmed.

   

*1: Tag character

The character at the digit where the digit number is pointed by the cursor is displayed.

*2: Digit No. of tag character

A digit No. 1 to 9 is displayed by pressing .

Press and simultaneously to clear the digit No. and press for reprogramming a

new digit No.

If the scale is cleared in a channel; the tag of this channel is deleted. Reprogram it if necessary.



Example of tag printing (RD200)

TAG

SHIFT

Tag characte

Digit No. of tag character *2

(

to 9 di

its.

)

(Fixed)

(Numeric numbers (1 to 9) appear for the digit not programmed by pressing .)

Channel

Curso

SHIFT

CLEAR

If clear is stored in the scale mode

;

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 133 134

Pas de commentaire

Omega RD200 Manuel d'utilisateur Page 75